From: "Deborah Hunt" <dhunt-AT-caribe.net>
To: <puptcrit-AT-lists.driftline.org>
Date: Fri, 3 Mar 2006 11:59:16 -0400
Subject: Re: [Puptcrit] Sealing the inside of masks (was: Info about Enamels)


Hi Dave,
I mix the paste and then apply the glue with my fingers to the paper and 
then apply the paper to the mould, which in my case is of clay.
Deborah
----- Original Message ----- 
From: "Dave Goboff" <davego167-AT-hotmail.com>
To: <puptcrit-AT-lists.driftline.org>
Sent: Friday, March 03, 2006 10:24 AM
Subject: Re: [Puptcrit] Sealing the inside of masks (was: Info about 
Enamels)


> Hi Deborah
>
> I'm really, really new to using paper mache so this is probably a reallly
> basic question, but do you soak the paper in water before applying to the
> mask/puppet, or do you mix up the paste mixture and brush it onto the dry
> paper?
>
> Dave Goboff
> Simply Puppets!
>
> ----Original <<< Snipped >>>Message Follows----
> From: "Deborah Hunt" <dhunt-AT-caribe.net>
> Subject: Re: [Puptcrit] Sealing the inside of masks (was: Info about
> Enamels)
> Date: Fri, 3 Mar 2006 10:10:05 -0400
> I use wallpaer paste...sometimes add a little white glue. 4
> layers...newspaper, craft paper, newspaper, craft paper.
> Same with all my pupppets.
> Deborah
>
>
> _______________________________________________
> List address: puptcrit-AT-lists.driftline.org
> Admin interface: 
> http://lists.driftline.org/listinfo.cgi/puptcrit-driftline.org
> Archives: http://www.driftline.org
> 


_______________________________________________
List address: puptcrit-AT-lists.driftline.org
Admin interface: http://lists.driftline.org/listinfo.cgi/puptcrit-driftline.org
Archives: http://www.driftline.org