From: "Kismet" <kismet-AT-bigpond.net.au> To: <puptcrit-AT-lists.driftline.org> Date: Sun, 18 Jun 2006 07:53:33 +1000 Subject: Re: [Puptcrit] what's the difference??? And do you find that time difference? 1 hour to set for AS and 5-6 for MS? The rep assures me that that is normal but 5-6 hours seems like an aweful long time to keep a material "workable". D ----- Original Message ----- From: "Mike Brose" <propworks-AT-juno.com> To: <puptcrit-AT-lists.driftline.org> Sent: Saturday, June 17, 2006 11:52 PM Subject: Re: [Puptcrit] what's the difference??? > Here's what I have noted in working with it.................. > > In the first 30 minutes or so of working with it, it is tackier than MS. > I find a get a better bond with Apoxie Sculpt when bonding mechanics and > such inside a head, etc. I still do some good prep work to the area to > be bonded (rough sanding, drill small holes to help it mechanically key > in, etc.) as I used to do with the MS. > > I find it smooths a little easier (with water) which is great when > modifying a casting, or patching. It feathers in a little better from > what I've noticed. > > It also appears to be less brittle. It's some pretty tough stuff. I had > a little left over on a project, and I formed it into a pancake about the > size of a half dollar and 1/8" thick or less, just to test it out a > little. I've tried to break it with my hands, and can not. IIRC, I could > break the MS in a similar size and shape. > > Cheers, > > Mike Brose > www.puppetsandprops.com > > > On Fri, 16 Jun 2006 06:19:24 -0400 "Mark S. Segal" > <segalpuppets-AT-comcast.net> writes: >> >> Am curious from a working with stand point... >> What is the difference between working with Magic Sculpt (which I >> use and like a lot) and Apoxie Sculpt which I have never used..... >> Anyone know? >> >> Thanks.... >> >> >> Mark > _______________________________________________ > List address: puptcrit-AT-lists.driftline.org > Admin interface: > http://lists.driftline.org/listinfo.cgi/puptcrit-driftline.org > Archives: http://www.driftline.org > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.394 / Virus Database: 268.9.0/368 - Release Date: 16/06/2006 > > _______________________________________________ List address: puptcrit-AT-lists.driftline.org Admin interface: http://lists.driftline.org/listinfo.cgi/puptcrit-driftline.org Archives: http://www.driftline.org
Display software: ArchTracker © Malgosia Askanas, 2000-2005