From: Pam Corcoran <corcoranpuppets-AT-hotmail.com> To: <puptcrit-AT-puptcrit.org> Date: Wed, 26 Aug 2009 21:22:58 -0500 Subject: Re: [Puptcrit] Bubble pipes/makers/machines Thanks for your suggestions, Christopher. Here is what I have in mind: During a dream sequence, a large, goofy virus puppet is teaching the audience a song. Bubbles appear, scaring the virus offstage. My stage is 5 feet wide. I'm thinking some sort of bubble pipe would give me enough bubbles to get enough of an effect. Good point about possible messes - I can get that ironed out in rehearsal. Hey, maybe I'll need to use a shower curtain for stage curtains....... Pam > From: heyhoot-AT-mindspring.com > Date: Wed, 26 Aug 2009 21:02:37 -0400 > To: puptcrit-AT-puptcrit.org > Subject: Re: [Puptcrit] Bubble pipes/makers/machines > > > On Aug 26, 2009, at 8:29 PM, Pam Corcoran wrote: > > > I would like to have bubbles float across my playboard - lots of them! > > Anyone have experience with bubbles on a puppet stage? It would only > > be for a few moments. I've been looking at stuff on line - and > > everything has lousy reviews. > > > > Pam > > Hey Pam, > > It is possible to do bubbles, but a bit better description of what > you want to do is in order. "Bubbles that float across my playboard" > could be anything from a few floating bubbles to a cascade of bubbles. > A magical moment, a witch's cauldron, used to suggest an under sea > setting or something else all together. In most cases the thing to > consider first is the potential mess and how they are to be blown. If > it is just a few, and you have a hand available, you can get one of > those no spill dispensers and do it that way. If you need more of a > steady "Lawrence Welk" sort of bubble thing, you can use a bubble > machine. Trouble with those are that they use a small pan of soap with > a wheel that turns to dip into the fan, and a fan that blows through > the ring on its up stroke. It's easy to spill those and make a big mess > - both of your puppets and the floor of where ever you are. The noise > can be a problem too, depending on how you work. It is also a bit of a > chore to place those where you will get the bubbles across the > playboard. And a bit of a pain dumping the unused soap back into a > container and cleaning the bubble machine before putting it away. > Finding a place to clean it can be a pain at some sites. > > That being said, I have used bubbles in some shows, successfully and > with out too much mess. I have blown then, had kids blow them, and used > a bubble machine. I've used both battery and electric models. I don't > have a "favorite" model, and none of them have had particularly long > lives. That's part of buying fairly cheap models party store and > Wal-mart models. If it were crucial I think I'd look into a more > industrial model. > > Also consider what the bubble residue may do to your stage, curtains, > and the venue (especially if you are doing home shows - birthday > parties and the like.) Staining may be an issue you want to think > about. > > Not trying to talk you out of it. Just trying to point out some things > you may have overlooked. I know that when I first started using bubbles > in shows I didn't think about ANY of that stuff - save for the clean up > aspect. > > Christopher > > _______________________________________________ > List address: puptcrit-AT-puptcrit.org > Admin interface: http://lists.puptcrit.org/mailman/listinfo/puptcrit > Archives: http://www.driftline.org _________________________________________________________________ Windows Live: Keep your friends up to date with what you do online. http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:ON:WL:en-US:SI_SB_online:082009 _______________________________________________ List address: puptcrit-AT-puptcrit.org Admin interface: http://lists.puptcrit.org/mailman/listinfo/puptcrit Archives: http://www.driftline.org
Display software: ArchTracker © Malgosia Askanas, 2000-2005