File puptcrit/puptcrit.1001, message 515


To: puptcrit-AT-puptcrit.org
Date: Sun, 31 Jan 2010 14:48:47 -0500
From: puppetpro-AT-aol.com
Subject: Re: [Puptcrit] Good Non-toxic adhesives for foam


I'm impressed. tacky glue doesn't work for most of the applications I've wanted to use it for...
Rolande
 





-----Original Message-----
From: Mary Horsley <mphorsley-AT-verizon.net>
To: puptcrit-AT-puptcrit.org
Sent: Fri, Jan 29, 2010 11:41 pm
Subject: Re: [Puptcrit] Good Non-toxic adhesives for foam


When I was teaching puppet classes a few years ago, I finally  
perfected using plain non-toxic tacky glue. I spread it on the two  
pieces of foam, let it dry, and then stuck it together. It worked  
amazingly well. My cat is still stuck together and doing fine. In  
fact, I have since begun making my own tacky glue by leave Elmer's  
white glue out in an open container overnight. Some of the water  
evaporates and wa-la! Tacky glue!

Mary
On Jan 29, 2010, at 10:05 PM, Andrew wrote:

> Sad to say that I have not been very active on the list in recent  
> months
> because things have been busy, busy, busy up here in the Great White  
> North
> but I wanted to share a recent discovery/revelation with everyone.
>
> For years I have been looking for a safe, non-toxic and easy to work  
> with
> adhesive for foam. I started using LePage's Green contact cement  
> several
> years ago and had some success with it, but found it akward to work  
> with.
> Well, I am very happy to say that I have probably left the toxicity of
> contact cement and other not-very-safe-to-inhale chemicals behind  
> forever
> now and have been turned on to Weldbond as my adhesive of choice for  
> poly
> foam and reticulated "Scott" foam. Works just as well, especially if  
> you use
> heat from a hair dryer to help speed up the drying time. Completely
> non-toxic so good bye respirators and the need for a well-ventilated
> workspace. Wish I had thought to try Weldbond a long time since I  
> almost
> always keep a small bottle of it at home for small projects.
>
> Most of the credit for this goes to Mathieu Rene, who had to improvise
> because we had/have about 20 puppets to build and lacked a spray  
> booth and
> proper ventilation at the studio here in Toronto. He's been  
> perfecting the
> art of gluing foam with Weldbond, but I had to make a few things  
> this week,
> tried it and loved it.
>
> Also good is Gem-Tac, another non-toxic adhesive that I was recently
> introduced to by a puppet builder in these parts. It's made by Beacon
> Adhesives - http://www.beaconadhesives.com
>
> Has anyone else made any discoveries in this area?
>
> - Andrew
> _______________________________________________
> List address: puptcrit-AT-puptcrit.org
> Admin interface: http://lists.puptcrit.org/mailman/listinfo/puptcrit
> Archives: http://www.driftline.org

Mary
mphorsley-AT-verizon.net
http://joypuppet.blogspot.com





_______________________________________________
List address: puptcrit-AT-puptcrit.org
Admin interface: http://lists.puptcrit.org/mailman/listinfo/puptcrit
Archives: http://www.driftline.org

 
_______________________________________________
List address: puptcrit-AT-puptcrit.org
Admin interface: http://lists.puptcrit.org/mailman/listinfo/puptcrit
Archives: http://www.driftline.org

   

Driftline Main Page

 

Display software: ArchTracker © Malgosia Askanas, 2000-2005