Date: Fri, 26 Sep 2003 08:14:53 -0700 (PDT) From: Emily DeCola <emzwemz-AT-yahoo.com> Subject: Re: PUPT: Ultracal vs. Plaster We're using hydrocal to make molds for neoprene -- and having some severe bubble issues... the current theory is that it's cause it's insanely humid, we're on a tight schedule and therefore aren't drying the molds enough before casting with the neoprene. Anyone have any idea whether this might be the case? Emily DeCola Jimsan777-AT-aol.com wrote: I use half hydrocal and half plaster (when I have it) and neoprene sets up very well. Best to put the mold out in the sun for a few hours to help the cast set and cure while still in the mold. Also "green" or fresh molds cause the neoprene to take longer to set, because there is residue moisture in the plaster. Very dry molds work best, but all of us are in a hurry, so heat as well as wind help accelerate the setting/drying process. My daughter sculpted a 5 inch head yesterday morning, (use water base clay) I made a three piece mold in about 2 hours, we poured the neoprene after the mold sat in the sun for two hours. I pulled the cast out this morning. It was perfect. It was 72 degrees and bright sunshine. Jim Gamble --- StripMime Warning -- MIME attachments removed --- This message may have contained attachments which were removed. Sorry, we do not allow attachments on this list. --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html --- --- Personal replies to: Jimsan777-AT-aol.com --- List replies to: puptcrit-AT-lists.village.virginia.edu --- Admin commands to: majordomo-AT-lists.village.virginia.edu --- Archives at: http://lists.village.virginia.edu/~spoons --------------------------------- Do you Yahoo!? The New Yahoo! Shopping - with improved product search --- StripMime Warning -- MIME attachments removed --- This message may have contained attachments which were removed. Sorry, we do not allow attachments on this list. --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html --- --- Personal replies to: Emily DeCola <emzwemz-AT-yahoo.com> --- List replies to: puptcrit-AT-lists.village.virginia.edu --- Admin commands to: majordomo-AT-lists.village.virginia.edu --- Archives at: http://lists.village.virginia.edu/~spoons
Display software: ArchTracker © Malgosia Askanas, 2000-2005