From: Jimsan777-AT-aol.com Date: Wed, 9 Jun 2004 19:15:11 EDT Subject: Re: PUPT: Marionette Care In a message dated 6/7/04 4:06:10 PM, bruno_descaves-AT-ybb.ne.jp writes: << Hello Michael, The way I have been doing for years after I attended a workshop with Albert Roser in Kyoto is the following: 1)You hang the marionette, untangled of course, by it's hook or leadher that is located on the control 2) you tide with 3 pieces of cloth(1 inch wide) or wool in three points all the strings of the marionette together: -one just above the head -one knot in the middle -one just under the control 3) you put the control over the marionette and inside it's bag. That's it! Hope you could understand Bruno >> OR JUST PUT THE MARIONETTE IN IT'S BAG, PULL THE DRAW STRINGS AND PUT IT IN THE BOX (OR TRUNK) AND LAY THE CONTROL ON TOP. but it all depends on the length of the strings with respect to the proportion of the figure. If the strings are really long, twist the puppet around and wrap it on a part of the controller. Jim Gamble --- Personal replies to: Jimsan777-AT-aol.com --- List replies to: puptcrit-AT-lists.village.virginia.edu --- Admin commands to: majordomo-AT-lists.village.virginia.edu --- Archives at: http://lists.village.virginia.edu/~spoons
Display software: ArchTracker © Malgosia Askanas, 2000-2005